Citazione:
Q: I get an 80010007 error message when I try to load a jb2usb patched game - why is this happening and how can I get the game to load?
A: This error means the game you are trying to load could not be decrypted. This can happen if you are running an out of date jb2usb dongle firmware. From time to time we will release jb2usb dongle firmware updates, and all new game patches that get released will always require the latest jb2usb dongle firmware in order to function. If you are receiving this error then please obtain the most recent jb2usb dongle firmware update from the downloads page and update your jb2usb dongle.
Q: How do I use jb2usb to play a purchased PS3 game that requires 3.6+ PS3 firmware?
A: jb2usb does not support directly playing original game discs requiring 3.6+ on lower firmware versions. In order to play such recent games on your jailbroken 3.55 CFW PS3 you must first dump your original game disc to HDD using one of the many supported PS3 backup managers such as Multiman. Once you have dumped the game, you must obtain and install a "jb2usb patch" corresponding to said game from the internet. This procedure effectively creates a copy of your game on a HDD, modified to function on your 3.55 CFW PS3 in conjunction with jb2usb. For full details, please refer to the jb2usb Users Guide on the download page.
Q: Where can I obtain jb2usb patch files?
A: Unfortunately we cannot host jb2usb patch files on this website, however they are easily obtainable through the search facility provided on the Game Patches page.
Q: What are the requirements for using jb2usb?
A: In order to use jb2usb, you MUST have a PS3 running firmware v3.55 or lower. If your PS3 is running a firmware version higher than 3.55 then you must first downgrade your PS3 via other means (such as hardware downgrade, please refer elsewhere for further information).
Q: What is the general procedure for getting 3.6+ games running on a 3.55 CFW PS3 with jb2usb?
A: The procedure is as follows:
1) Download and install the jb2usb 3.55 CFW (custom firmware) on your PS3. The jb2usb CFW is required in order to allow the jb2usb dongle to function with your PS3
2) Obtain dumps of your 3.6+ PS3 games using PS3 backup managers or other methods
3) Obtain jb2usb game patches corresponding to the game dumps you have, and install these patches over the top of your game dumps. The patched game dumps should be stored either on your PS3's internal HDD or an external USB HDD
4) Insert the jb2usb dongle into your PS3 and turn on the console. Once the PS3 has finished booting, you may then launch your favourite backup manager (such as Multiman) and from there select your jb2usb patched games
Q: There is no jb2usb patch available for my favourite game XYZ, can I still play it with jb2usb?
A: Unfortunately, you will need to wait until a jb2usb patch is available. The jb2usb team monitors various web forums, so if there is a title you want to play then make a post on a PS3 related forum requesting the game. We will most likely see your post and do our best to release a patch as soon as possible.
jb2 User Guide
JB2USB Usage
JB2USB Identify:
Before you may use JB2USB, you must first install our 3.55-Dongle custom firmware onto your PS3.
Step1. Insert JB2USB into one of the USB ports on your PS3 and power the system up.
Step2. The red LED will light on during the process of PS3 start up. If the JB2USB is identified by PS3, the red LED turn off and the green LED light on; or the red LED light flicker, you must restart your PS3 in this situation.
Note. Do not remove the JB2USB at any point while the PS3 is running
.
Blue-ray Disc Game:
Insert disc into PS3, the game will auto start.
HDD Game:
Before you may run HDD games, you must first install MutliMAN.
Step1. Insert USBHDD into one of the USB ports on your PS3,
Step2. Select (game -> MultiMAN) to run MultiMAN,
Step3. Press R1 in MultiMAN’s XMB interface, all games in USBHDD will be displayed.
Step4. Load one game you want, PS3 will back to PS3’s XMB interface automatically. At this time menu (game) -> (app_home/PS3_GAME/) is the entry of the loaded game.
Step5. Select (game) -> (app_home/PS3_GAME/) the game will start up
JB2USB Update
When there is a new firmware of JB2USB, you should update your JB2USB.
The JB2USB is not only a Dongle of PS3, but also a mass storage device When insert JB2USB into your PC. You can only write data into this mass storage device. The update process includes two stages: file copy and firmware self update.
Step1. Insert JB2USB into one of the USB ports on your PC, a removable device will be enumerated by PC, the name of the device is “JB2USB”. The red LED light on.
Step2. Copy update file into the removable device “JB2USB”. The red LED light flicker until the copy is completed.
Step3. After the entire update file are written into “JB2USB”, the self firmware update start, at this time, both the red and the green LED are light on. The removable device will be uninstalled simultaneously.
Step4. The red LED turns off and only the green LED light on after the update process is completed.
Notes: Insert JB2USB into PC will not display the update file in the removable device.
System update
Once you have confirmed that you have obtained the correct updater file, proceed with the update as follows:
Step1. Obtain a USB storage device such as a USB HDD or USB flash memory stick,
Step2. Create a folder on the storage device in which to save the update file. Using a PC, create a folder named “PS3” on the storage device. Within the PS3 folder, create a folder named "UPDATE",
Step3. Copy the PS3UPDAT.PUP file to the “UPDATE” folder created in step 2. Thus, you will have this path structure on your USB storage device: \PS3\UPDATE\PS3UPDAT.PUP,
Step4. Boot your PS3 and insert the USB storage device into the PS3,
Setp5. From the home menu, select (Settings) ‐> (System Update) ‐> (Update via Storage Media),
Step6. The PS3 will notify you that the “3.55‐Dongle” update was found. Select OK then follow the onscreen instructions to complete the update,
Step7. After the update has completed, your PS3 will restart and you now be running the 3.55 custom firmware. You may now enjoy the use of the JB2USB.
(NOTE: The above procedure is only applicable to PS3’s on or below system software v3.55)
Install Software
Step1. Obtain a USB storage device such as a USB HDD or USB flash memory stick,
Step2. Copy the MultiMan_02.xx.xx file to the root directory of USB device. Thus, you will have this path structure on your USB storage device: \MultiMan_02.xx.xx,
Step3. Boot your PS3 and insert the USB storage device into the PS3,
Step4. From the home menu, Select (game) -> (Install Package Files)
Step5. The PS3 will display all software in root directory of USB device. Select install MultiMan_02.xx.xx into you HDD.
Step6. After the install completed, the icon of MultiMAN will display at (game) -> (MultiMAN).