Ciao a tutti il Team Xecuter annuncia alcuni nuovi prodotti:


Nello spoiler le caratteristiche

It's been 9 months in the making (no thanks to several motherboard/dashboard revisions during our development time), and now after an exhaustive test run, the CR3 Pro is ready for public consumption.

This is aimed at users who demand the highest RGH performance possible and the ability to tune their settings to an extreme level. The CR3 Pro is not for beginners, modders looking for cheap and cheerful solutions or anyone who is happy with slow, unreliable glitching.

The first release of CR3 Pro is designed for slims with FULL POST only (Trinity, Corona v1 & Corona v2). As Corona v3 and v4 had FULL POST removed there will have to be a different version of CR3 PRO for those models using FAKE POST. This is being tested right now and will be released soon.

We have put together two packages. The CR3 Pro Kit which covers the basics (mainly for those who already own the QSB's and JR Programmer v2 etc) and the CR3 Pro Ultimate 19pc Kit which includes absolutely everything that you need to do a complete high performance install.

Xecuter CR3 Pro v1.0S FULL POST Features:

Brand new design – totally new RGH code
Next Generation RGH Tool – The highest performing RGH device on the market
Full POST Slim version supports Trinity, Corona v1 and Corona v2
Full POST monitoring and tuning via the New CR3 Pro RATER Feature – fine tune your boot times to PERFECTO! (Requires JR Programmer v2)
Multiple pulse settings via DIP Switches
Multiple Ceramic Cap options (7pc kit included 10pf, 22pf, 30pf, 47pf, 68pf, 82pf and 100pf)
New Built In ROL Option (Show Debug LED On Front Panel Ring Of Light)
Built-in Ribbon Cable Connector For DemoN (Includes CR_EN and XSVF Programming – no soldering or wires)
Quality Assured – No Cheap Chinese Knocks-Offs
Optimized timing for each motherboard version
Easy programming via JTAG
Power LED
Reset Cycle Debug LED
Easy Install (Includes All Wires)
Works perfectly with J-R Programmer v2 & DemoN
New v3 QSB Add-Ons Available (Included with the Ultimate Kit)
JR Programmer v2 is required for CR3 Pro RATER & programming functions (Included with the Ultimate Kit)
Trusted Team Xecuter Design & Warranty

Questa è l'immagine del prodotto:

Questo il contenuto della confezione:

Xecuter CR3 Pro v1.0S FULL POST
7pc Ceramic Cap Kit (10pf, 22pf, 30pf, 47pf, 68pf, 82pf, 100pf)
FFC POST_OUT Ribbon Cable – Trinity
FFC POST_OUT Ribbon Cable – Corona
CR3 Pro Install Wires (Optional if no QSB Used)
Il prezzo proposto al pubblico sarà: $39.95

Sarà anche disponibile un kit completo per il nuovo CR3 PRO comprendente:

Xecuter CR3 Pro v1.0S FULL POST
Xecuter JR Programmer v2 (*See Notes Below)
Xecuter JR Programmer / NAND-X / CoolRunner QSB Kit v3 – Trinity (**See Notes Below)
Xecuter JR Programmer / NAND-X / CoolRunner QSB Kit v3 – Corona (**See Notes Below)
Xecuter XCLAMP Removal Tool
7pc Ceramic Cap Kit (10pf, 22pf, 30pf, 47pf, 68pf, 82pf, 100pf)
FFC POST_OUT Ribbon Cable – Trinity
FFC POST_OUT Ribbon Cable – Corona
JR Programmer v2 to CR3 Pro POST Monitoring Cable
JR Programmer v2 QSB Cable
JR Programmer v2 JTAG Update Cable
CR3 Pro Install Wires (Optional if no QSB Used)

*The new J-R Programmer v2 now includes full POST monitoring for the CR3 Pro RATER feature. Speed enhancements are also included that puts it within 50 seconds of the high speed NAND-X

Il prezzo al pubblico si aggirerà intorno ai $69.95

Questa è la foto del kit completo:

Ma non è finita, finalmente sono disponibili le PCB sostitutive per i lettori DG-16D5S, ricordo che comunque è necessario il RGH per creare il firmware necessario a queste PCB per funzionare.

Le specifiche del prodotto sono sotto spoiler:

Do you have a faulty Liteon DG-16D5S or Hitachi DLN10N DVD in your Xbox 360? Are you swapping your drive to another console and are unable to program your firmware due to write protection being enabled?

Yet again Xecuter have made the previously impossible, possible.

Fits all Liteon DG-16D5S Drives
Can run all latest firmware versions for Liteon DG-16D4S, Liteon DG-16D5S and Hitachi DLN10N
Easily programmable using the X360USB PRO V1 or V2 (Update to the latest firmware v20.1)
Requires the latest Jungle Flasher 0.1.94(320) & J-Runner 0.2.286
C4E's new LTU (LT Ultimate) firmware now allows booting of any Liteon or Hitachi based system without any previous firmware dump (inc the DG-16D4S and DG-16D5s 1175/1532 and Hitachi 0500/0502 firmwares) – all you need is the DVD Key and FCRT.bin which can be extracted using RGH or DGX if it's a newer version.
Includes solderless quick install adapter
Includes heatsink for drive controller IC

Questa è l'immagine del prodotto:

Prezzo consigliato al pubblico $69.95

Fonte : Team Xecuter